ACME Drawing lubricants are designed to provide a film between the tool and metal to prevent die galling, die wear and to reduce friction. This allows the proper flow of metal under pressure to plastically deform with minimum wear and friction.

Drawing oils are formulated in a range from low to high viscosities utilizing polar, extreme pressure (EP) lubricants, and combinations of both as required by application.

• Lubricant formulations that can be used for shallow drawing of aluminum and deep drawing of aluminum, copper, brass and bronze.
• Lubricants designed for stamping and drawing of non‐ferrous metals such as copper, brass and bronze.
• Products intended for the stamping and shallow drawing of carbon steels and alloy steels.
• Drawing oils for the stamping of alloy and stainless steels, shallow drawing of alloy and stainless steels and deep drawing of carbon steels, alloy and stainless steels.

Water soluble products using highly refined petroleum hydrocarbons blended with additives such as EP, polar, emulsifiers, corrosion inhibitors and protection from microbial infestation.

• Products intended for stamping operations on carbon steels, copper, brass and bronze.
• Soluble oils for severe drawing and blanking operations on carbon and stainless steels.

Vanishing oils are special purpose lubricants that are chemically inert, colorless and odorless liquids dry to the touch after one hour and used when cleaning of the workpiece is not required.

• Stamping of low carbon steel and nonferrous metals.

ACME product recommendations are based on these factors that must be considered to select the correct lubricant.

• Severities of the draw.
• Type of workpiece metal.
• Method of application.
• Post‐process compatibility.
• Regulatory issues

Severity Classification Guideline

Low Severity – based on low‐carbon commercial quality steel.

• Maximum localized stretch of 10% in a 1 inch length.
• Drawing a cup with 10% reduction in diameter.

Moderate Severity ‐ based on low‐carbon commercial quality steel.

• Maximum localized stretch of 20% in 1 inch length.
• Drawing a cylindrical shell with 20% reduction in diameter.

High Severity – based on low‐carbon drawing quality sheet steel.

• Maximum localized stretch of 30% in 1 inch length.
• Drawing a cylindrical shell with 30% reduction in diameter.

Maximum Severity – based on low‐carbon drawing quality sheet steel.

• Maximum localized stretch of 40% in 1 inch length.
• Drawing a cylindrical shell with maximum reduction in diameter (reduction of 40% or more.

Stainless Steels lubrication requirements are more critical because it is usually necessary to preserve the high‐quality surface. Stainless steels have higher strength, greater hardness, lower thermal conductivity, and higher coefficient of friction. More heat is being generated at the surface being formed, and less is being conducted away than in forming a comparable workpiece from low‐carbon steel.

Aluminum, aluminum alloys, cooper and copper alloys lubricants must be compatible and suitable with the particular forming operation. Avoidance of staining or corrosion is an important consideration.

The post Forming / Drawing / Stamping appeared first on Acme Refining.

ACME can provide Synthetic Air Compressor Oils that are formulated with different base fluids: PAO (polyalphaolefin), Synthetic Blends, Diester, Polyglycol/Ester Blends, Polyalkylene Glycol and Alkylate. Every base fluid has its own unique properties and is primarily used in specific applications. Please contact us for specific product recommendations dependent upon specific applications.

• PAO with advanced additive technology is recommended for rotary screw, centrifugal and reciprocating compressors. Products have low pour points, high viscosity index, excellent water demulsibility. Used in Food Grade compressors lubricants and is NSF Certified and meets USDA 1998 (H-1) guidelines, Kosher approved. Available in ISO Grades 32, 46, 68, 100 and 150
• Synthetic Blends are a blend of synthetic and petroleum base fluids and are useful in multi-purpose applications. Treated with an additive to provide corrosion, oxidation inhibition, anti-wear, defoamer, sludge and deposits protection. Available in ISO Grades 32, 46, 68, 100, and 150.
• Diester base stocks combined with additive technology that cover applications for rotary vane, rotary screw and reciprocating compressors of all ages and designs. Provide low temperature fluidity, better thermal conductivity to reduce operating temperature, reduced friction, high temperature thermal stability and greater resistance to mechanical stress. Available in ISO Grades 32, 46, 68, 100 and 150.
• Polyglycol/Ester blend series provides superior performance in the areas of oxidation resistance and deposit formation for rotary screw compressors. Available in SAE Grade 5W-20 and 10W-20.
• Polyalkylene Glycol formulated to combat problems associated with high pressure reciprocating compressors pumping natural gas, carbon dioxide or process gases. Resistant to hydrocarbon dilution and adsorption of gas stream components which maintains the proper viscosity for wear protection and resists wash-out and carryover. Typically requires a waste stream analysis for proper recommendation.
• Alkylate fluids are formulated for use in reciprocating, rotary and centrifugal refrigeration compressors using ammonia, R12, R22, R114 and R502. The products are extremely stable at compression temperatures and provide excellent low temperature properties.

The post Compressor Oils appeared first on Acme Refining.

ACME Premium AW Hydraulic Oils ISO Grades 22, 32, 46, 68, 100, 150 and 220

Formulated with Group II paraffinic base oils combined with a premium antiwear hydraulic oil package. Products will provide protection against oxidation, wear, corrosion and are compatible with seals materials typically found in hydraulic systems. They meet requirements for Denison HF-0, HF-1, HF-2, U.S. Steel 127, 136, DIN 51524-2, DIN 51524-3, VickersM-2950-S, I-286-S and Cincinnati Milacron P-68 (AW32), P-69 (AW46), P-70 (AW68) specifications.

ACME Synthetic Ashless Hydraulic Oils ISO Grades 15, 32, 46, 68 and 100

Formulated with the highest quality synthetic hydrocarbons combined with rust and oxidation inhibitors to protect against rust, wear, the formation of sludge and are compatible with seal material typically found in hydraulic systems. They meet requirements for Denison HF-O, Vickers and Cincinnati Milacron P-68, P-69 and P-70 specifications.

ACME Food Grade Hydraulic Oils ISO Grades 15, 32, 46, 68 and 100

Formulated specifically for hydraulic systems operating in the food service, beverage and packaging industry. These fully synthetic lubricants are NSF Certified and meet U.S.D.A. 1998 (H-1) guidelines (lubricants with possible incidental food contact). They meet requirements for Denison HF-O, Vickers and Cincinnati Milacron P-68, P-69 and P-70 specifications.

ACME Biodegradable Hydraulic Oils ISO Grades 32, 46 and 68

Premium environmentally responsible hydraulic fluids designed to provide exceptional performance in hydraulic and circulation systems. Engineered to meet performance requirements and satisfy the rigorous criteria for biodegradability and toxicity. These oils meet the requirements for ultimate biodegradability and non-toxicity making them an excellent choice for systems operating in environmentally sensitive areas.

ACME Fire Resistant Hydraulic Oils ISO Grades 46 and 68

Based on quality synthetic, organic, esters and carefully selected additives to achieve excellent hydraulic fluid performance. They are fire-resistant with self-extinguishing properties, non-irritating, biodegradable, non-toxic to aquatic life and contain no hazardous ingredients. They are not water soluble and can be removed from collector systems by standard skimming techniques.

The post Hydraulic Oils appeared first on Acme Refining.