November 10, 2016
Acme Premium AW Hydraulic Oils ISO Grades 22, 32, 46 and 68 are formulated for use in Industrial and Mobile equipment hydraulic systems. These fluids are […]
November 10, 2016
Acme Extreme Pressure (EP) Gear Oils were formulated to meet the demanding requirements of gear sets operating under severe service conditions. These gear lubricants provide excellent […]
November 10, 2016
Acme Spindle Oils are light colored low viscosity fluids. The lubricants will provide oxidation resistance and corrosion protection for bearings operating in high speed spindles of […]
November 10, 2016
Acme Way Lube Oils WL 325, WL 500, WL 950 and WL 1100 were designed to provide smooth operation under normal and severe conditions. Formulated using […]
Solvents
Rule 66 Mineral Spirits
Odorless Mineral Spirits
High Flash Solvents
Isopropanol
Odorless Mineral Spirits
High Flash Solvents
Isopropanol
Process Oils
Acme Process Oils are designed for use as raw materials in manufacturing a wide range of products.
Naphthenic Oil
Visc. Range – 60-2000 SUS@100°F
Paraffinic Oil
Visc. Range – 45-2400 SUS@100°F
Naphthenic Oil
Visc. Range – 60-2000 SUS@100°F
Paraffinic Oil
Visc. Range – 45-2400 SUS@100°F
Compressor Fluids
Acme Compressor Fluids offer superior thermal and oxidation stability, extremely low pour points, high viscosity index and excellent heat transfer qualities.
Synthetic Compressor Fluids
Reciprocating
Screw
Rotary
Vane
Scroll
Centrifugal
Synthetic Compressor Fluids
Reciprocating
Screw
Rotary
Vane
Scroll
Centrifugal
Cylinder Oils/Circulating Oils
ACME Cylinder Oils are formulated to provide film strength, and cling tenaciously to work and gear contact surfaces. They will not channel and are not corrosive to steel or bronze. This – phased protection assures long and trouble-free work gear life. ISO 460 AGMA 7 COMP., 680 AGMA 8 COMP., and 100 8A COMP.
Turbine Oils
ACME utilizes Group II base stocks that are with blended with specially selected additives designed to achieve premium turbine oil performance, particularly in the areas of resistance to oxidation and the formation of sludge and varnish at elevated temperatures. ISO 22, 32, 46, 68 and 100.